For use with 1/4” misting line, cut misting
line in the place where you want to position your misting nozzle
and insert the straight portion of the 1/4” line tee. Push
a small piece (1” to 2”) of 1/4” misting line into
the bottom of the line tee and push the barbed end of the misting
nozzle in to secure.
For use with 3/8” misting line, punch a hole in the line
with a hole punch and insert barbed end of mister. Mister should
be installed at 120 degree angle to the ground, 3’ to 4’
apart.
Operating Pressure: 40 to 80 PSI
Flow Rate: .75 GPH
